Taper-lock-bushings, taper-lock bushings . mount these hubless bushings flush into your sprocket or pulley for a slim profile with no protruding screws. they are for use with taper-lock sprockets of the same bushing style. as you tighten the included set screws, the bushing grips the shaft and pulls it into your sprocket or pulley.. Dodge taper-lock bushings are flangeless for clean, compact application. they are engineered with an 8° taper and a flush-mounted design with no protruding parts providing secure locking and elimination of wobble. in addition, taper-lock bushings are available with an optional integral key in popular sizes for a more precise fit., taper-lock bushings are split through the flange and gradual taper to provide a true clamp fit on the shaft that is the equivalent of a shrink fit. california proposition 65 warning: this product contains chemicals known to the state of california to cause cancer and/or birth defects or other reproductive harm..
Taper-lock® bushings; these are stock parts — we also have made-to-order parts or contact us. taper-lock® bushings. if catalog number ends in an ‘s’ the part is a steel bushing. if catalog number ends in an ‘ss’ the part is a stainless steel bushing., taper lock bushing is a type of bushing designed without flanges for clean and compact application. the bushings are made with an 8-degree taper and flush-mounted design with no protrusions. the model is preferred for secure locking, especially when you want to reduce wobble. like mst bushings, the lock taper models are designed for easy mounting on the shaft..
Tb woods 1610 tl1610114 taper lock bushing, cast iron, inch, 1.25" bore, 1200 lbs/in torque, standard design, standard keyway $15.47 $ 15 . 47 get it as soon as tue, may 26, searching for taper-lock bushing tapered and qd bushings? grainger's got your back. easy online ordering for the ones who get it done along with 24/7 customer service, free technical support & more..
Dodge 117084 taper-lock bushing - 1610 series, 1.1250 in bore, finished with keyway, 1/4 x 1/8 in keyway, sintered steel, split-tapered bushings . the tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings. they're for use with split-tapered sprockets and pulleys of the same bushing style.. Use a tapered or qd bushing from grainger with sheaves, pulleys, sprockets and many other power transmission applications. flanged quick-disconnect bushings feature a completely split design to help provide easy installation and disassembly.